10 Watt Standard 12 Volt DC LED Power Supply


SKU 810100 Category



10 Watt Standard 12 Volt DC LED Power Supply

  • Delivers highly efficient, stabilized power for LED lighting. For use with all Armacost Lighting LED products:
    • White RibbonFlex LED Tape Lighting
    • RGB Custom Color RibbonFlex LED Tape Lighting
    • LED puck lights, mini lights, and linear lights

Standard Electronic Power Supplies are compatible with Armacost Low-Voltage Dimmers only.

These power supplies cannot be used with any 120-volt AC dimmer. For dimming using a Lutron dimmer, choose an Armacost 120-Volt AC Dimmable Power Supply.



  • Prewired with AC cord and plug for use with existing outlets
  • When end caps are removed, power supply can also be direct wire installed through onboard terminal blocks
  • Easily mounts to surfaces using mounting tabs
  • Use minimum 18 AWG rated cable or better to tie in with line voltage
  • Automatic shut-off in case of lightning, overload, open or short circuit, over-temperature or other fault
  • Power supply will automatically restart after a fault has been corrected
  • For dry location use only (IP 20)
  • Designed for hardwired or plug-in applications



  • Input voltage: 120-volt AC
  • Input frequency: 50/60Hz
  • Constant voltage output: .67A
  • Output voltage: 12-volt DC
  • Rated output power: 0~10 watts
  • Operating temperature: -5 to 95°F (-15 to 35°C)
  • IP protection: IP20, dry location only
  • Dimensions: 3 in. L x 1-1/2 in. W x 7/8 in. H
    (76mm L x 38mm W x 22mm H)

Limited 3-year warranty. This product is for dry location use only. Failure to use this power supply for its intended purpose or improper installation will void warranty.


Product Information    Power Requirement Chart    Choose the right power supply for your needs