24 Watt Dimming 12 Volt DC Power Supply

$48.97$49.97

Clear
SKU 24-Watt Dimming LED Driver Category

Description

24 Watt Dimming 12 Volt DC Power Supply

Armacost Lighting’s new 24 Watt Universal Dimming LED Lighting Driver provides the utmost in dimming performance, reliability, economy and versatility. It uses an integrated microprocessor to automatically sense and optimize LED dimming performance based on the load and type of dimmer being used. This electronic, solid-state power supply is also compatible with the Armacost low voltage 12V DC dimmers and RGB LED lighting controllers.

The 24 watt universal power supply works equally well whether powering a 3 watt LED puck light or 24 watts of tape lighting, or a combination of both. No minimum power load is required for effective, flicker-free dimming. Connect up to 100% of the rated 24 watt maximum load.

  • Smooth, full range flicker-free dimming, no “pop-on” or “drop-off” of lighting
  • Compatible with 120V AC dimmers and lighting controls
  • Compatible with all Armacost Lighting 12V DC wireless dimmers and RGB controllers

 

DESCRIPTION:

  • For direct wire installations. Simply remove end caps to access on-board terminal block connectors; use NM 14AWG 2C cable (Romex® style) to tie in with 120V AC line voltage
  • Uses desirable soft start on and fade off technology
  • No minimum power load; dimming works equally well whether powering a single 3 watt LED puck light or 24 watts of tape lighting, or a combination of both
  • Connect up to 100% of the rated 24 watt maximum load – derating performance is not required
  • Class 2 power supply is intrinsically safe
  • NEC Class II AC input requires no ground wire connection
  • Safety features include automatic shut-off in case of lighting overload, open circuit, short circuit, over temperature or other fault; the unit will automatically restart after the fault is corrected
  • Limited 3-year warranty. Failure to use this power supply for its intended purpose or improper installation will void warranty.

Armacost Dimmable LED Drivers are compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic lowvoltage, ELV, and trailing edge) AC dimmers, including higher end lighting controls, such as Lutron GRAFIK Eye® systems. They are also compatible with low-voltage PWM dimmers and RGB color controllers.

Although virtually all dimmers will work with Armacost Dimmable LED Drivers, Armacost Lighting recommends dimmers that can be programmed or have an adjustment dial to set the low end dimming range, such as Lutron® C•L and Leviton IllumaTech® Universal Dimmers. These dimmers are readily available in stores and offered in a wide range of styles and colors.

*Disconnect AC cord plug when using an AC dimmer. The National Electrical Code®  (NEC) prohibits dimming lights that are connected to standard plug-in receptacle outlet. Use direct wire installation method with an AC dimmer or use an Armacost Lighting low voltage dimmer on the 12-volt side. 

 

OPTIONS:

 

With a Plug $49.97

Without a Plug $48.97

 

 

Specifications

 

  • Type: Cross Platform AC, DC Dimmable RGB Compatible Electronic LED Power Supply
  • Input voltage: 100-120V AC 50/60Hz, λ=0.65C
  • Output voltage: 12V DC Constant Voltage
  • Maximum load: 24 watts, 2A
  • Indoor/outdoor, ETL listed for use in dry and damp locations
  • Power factor: >65%
  • Efficiency: >82%
  • Enclosure material: UL Thermoplastic
  • Enclosure Dimensions≈ 6-1/16″ L x 2-1/4″ W x 3/4″ D (154.5mm L x 54mm W x 19.5mm D)
  • Protections: Short circuit, over load, over voltage, over temperature

24w led driver

ETL Class 2 power supply

FCC Part 15B certified for both USA and Canada

Limited 2-year warranty. Failure to use this power supply for its intended purpose or improper installation will void warranty.

 

Product Information   Choose the right power supply for your needs

Additional information

Model

With a Plug, Without a Plug