Product Description
4 Column Individual Bottle Wine Rack F02-A + B
RedRack
48 bottles
Beautiful ALL HEART
CALIFORNIA REDWOOD
RedRack may be stacked on top of one another or placed side by side. 2 heights are available: 32″ (A) and 48″ (B). We offer 2 main sizes in widths: 16″ and 32″ (only wood case modules are 24″) to allow for a number of configurations. RedRack wine racking sits 2 3/4″ away from the wall for a total of 9″ depth. Some assembly required.
Incredibly affordable
Luxurious style
Modular system
Stackable and expandable
Easy installation
Variety of accessories available
DESCRIPTION:
48”h x 16”w x 9”d
Weight: 7.5lbs
OPTIONS:
FO2A 4 Column Individual Bottle Wine Rack
32”h x 16”w x 9”d
Only logged in customers who have purchased this product may leave a review.
Related Products
Designer Series Rectangular Bin and Case Storage
Designer Series Rectangular Bin and Case Storage Our versatile Rectangular Bin and Case wooden wine rack can store 7 wood cases with an additional one on top, or store uncrated bottles in the compartments. Perfect for easy wine storage when you receive shipments from your wine club. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 73 1/2″width – 26-11/16″depth – 13-1/2″bottle capacity – 153 or 7 wood cases KIT SERIES UPGRADES Spacer Bars: Spacer bars come with a dado that comfortably fits each column of your racking. Putting together the racks can be done with the nails provided, or you can utilize a brad nailer for faster assembly. Note that if you choose to assemble your racks with screws, you will need to pre-drill and countersink the holes to avoid the accidental splitting of the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. With these rails, your bottles are stored securely above the floor level so they do not break accidentally by hitting a hard floor. Added to this,, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. Assembly Guide$294.11 – $646.12
Designer Series – 4 Column Individual
Designer Series – 4 Column Individual The 4 Column Individual Bottle wine rack supports the same individual bottle racking design as our other products but only has four columns. Depending on your space, you can mix and match with others in the series. Each bottle is cradled on two rails that are cut with beveled ends and rounded edges which ensure the labels will not tear when the bottles are removed. The 4 Column Individual Bottle wine rack is 4 columns wide x 20 rows high. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Assembly Instructions Specs height – 72″ width – 18-11/16″ depth – 13-1/2″ bottle capacity – 80 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail.$303.19 – $563.93
Designer Series – 2 Column Individual
Designer Series – 2 Column Individual The 2 Column Individual Bottle wine rack supports the same design as the 5 Column Individual Bottle wine rack, but in a smaller width. Each bottle is cradled on two rails that are cut with beveled ends and rounded edges which ensure the labels will not tear when the bottles are removed. The 2 Column Individual Bottle wine rack is 2 columns wide x 20 rows high. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 72″ width – 9-11/16″ depth – 13-1/2″ bottle capacity – 40 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail.$214.99 – $351.70
Designer Series – Solid Diamond Cube
Designer Series – Solid Diamond Cube The Solid Diamond Cube is a popular, attractive and sturdy wine rack. It’s a solid choice over the open Diamond Cube but either works to attractively store your wine bottles. The decorative face trim adds to the sturdy appearance and is a finishing detail only previously offered on our top of the line custom racking. Each wooden wine rack is 1 column wide x 3 cubes high. Each cube is comprised of 4 quadrants holding 10 bottles each. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 72″ width – 23-3/16″ depth – 13-1/2″ bottle capacity – 132 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. Assembly Guide$546.24 – $1,108.36
Designer Series – Table Top below Archway
Designer Series – Table Top below Archway This beautiful tabletop is meant to be added on top of the Designer Series Open Diamond Bin. When you incorporate the Archway over the two products, you create a beautiful Tasting Center. The table top is designed to be placed above the half height diamond bin wine rack, providing a convenient area to open your wine bottles. This product requires assembly. Specs height – 5/8″ width – 45-11/16″ depth – 13-1/2″ bottle capacity – 0 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. archandtabletop guide$125.97 – $242.51
Designer Series – Archway 2
Designer Series – Archway 2 Break up your individual wine storage by adding a beautiful Archway into your wine racking. It creates an eye catching focal point and allows you to get a little creative with the art behind it. The Archway can be combined with a few separate components to create different configurations. If you add our half height rectangular bin or half height diamond bin you can add a special tabletop to them to create storage space or a tasting center. The archway creates a backdrop for your favorite wine art piece. Product does requires assembly. Specs height – 39 1/16″ width – 26-5/16″ depth – 13-1/2″ Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. Assembly Guide$440.37 – $636.85
Designer Series – 2 Column Individual with Display
Designer Series – 2 Column Individual with Display DESCRIPTION: The 2 Column Individual Bottle with Display Row wine rack combines all the features of the standard 2 Column Individual Bottle wine rack with the added benefit of display rows. The 15 degree angle of the wine display row keeps the cork moist while allowing you to easily view the label. Each display rack is 2 columns wide x 19 rows high with 2 bottles of display. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 72″ width – 9-11/16″ depth – 13-1/2″ bottle capacity – 38 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail.$214.99 – $351.70
Reviews
There are no reviews yet.