Product Description
DESCRIPTION:
The WKCE Series Wine cooling units are a compact design with cold air discharge on the bottom, which makes them ideal for installation in cabinets.
Because of their configuration the WKCE series wine refrigeration cooling units are not rated for specified number of cubic feet. They are intended for cabinets and other constricted enclosures. Ask your Breezaire Dealer for details.
The WKCE has a digital electronic (Sentry III ) control system which features:
Large, easy to read, green LED display.
Accurate, easy to adjust, readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures.
Power outage protection, which delays units start up after power outages.
Blocked airflow protection, which shuts down the unit and protects your wine in case of high temperatures caused by condenser blockage.
Controls temperature by enclosure air sensors or optional bottle probe.
Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source
*NOTE; WKC or WKCE models are in many different manufactures Wine cabinets many Wine cabinet units are modified in different forms please contact Breezaire direct for replacement information.
All units are 115 Volt, 60 Hz
Model Electrical Dimensions (in) Weight
WKCE 1060 3 AMP 18W x 10.5H x 16.6D 45lb
OPTIONS:
Unit Modification:
Special Order: Cord out the bottom (COB)
Standard: Cord out the front
Special Order: Hot air out the top (HAU)
Standard: Hot air out rear of unit
Bottle Probe
1) Both cabinet models come with the electric cord out the front (standard) or can be routed out the bottom near the rear of the unit (special order).
2) All cabinet units can be manufactured with the Hot Air out the rear (standard) or out the top of unit (special order).
All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned.
Only logged in customers who have purchased this product may leave a review.
Related Products
Breezaire WKL4000 Wine Cellar Cooling Unit (for cellars up to 1000cuft)
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series Wine Cellar Cooling systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III control system. Sentry III control system offers the following features: -Large, easy to read, cool green display. -Accurate, easy to adjust temperature set points with continuous display of cabinet temperature. -Power outage protection. -Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure. -Controls temperature by enclosure (cellar) air sensors or optional bottle probe. Model Enclosure Electrical Dimensions (in) Weight Volume (max) WKL 4000* 1000 cu.ft. 7 Amps 14.25W x 19.75H x 21.63D 81 lb. *WKL 2200 & WKL 4000 models are is available in a 220v – 50 hz (Model WKL 2150 & WKL 3350) Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source. OPTIONS: Unit Modification: Special Order: Cord out the bottom (COB) Standard: Cord out the front Bottle Probe The WKL 2200 models are manufactured with the cold air out the front (standard) The 2200 thru 8000 models are manufactured with the hot air out the rear (standard) All six models come with the electric cord out the front (standard) or can be routed out the bottom (special order). The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front (Standard). The installer can configure the cold air to be routed out the top (as pictured below). All WKL model have a drain tube located in the base of the unit on the cold side. Breezaire can install a drain fitting on the rear of the unit. The drain fitting is for removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed with in 2 to 10 inches from unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run (Special Order) New WKL BLACK Series (upgrade) Not only have we changed the color we have made the base out of Stainless Steel. The BLACK series is a upgraded WKL model. All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned. WKL Installation Instructions Warranty Sentry Owners Manual$1,612.00
Breezaire WKCE2200 Wine Cellar Cooling Unit
DESCRIPTION: The WKCE Series Wine cooling units are a compact design with cold air discharge on the bottom, which makes them ideal for installation in cabinets. Because of their configuration the WKCE series wine refrigeration cooling units are not rated for specified number of cubic feet. They are intended for cabinets and other constricted enclosures. Ask your Breezaire Dealer for details. The WKCE has a digital electronic (Sentry III ) control system which features: Large, easy to read, green LED display. Accurate, easy to adjust, readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures. Power outage protection, which delays units start up after power outages. Blocked airflow protection, which shuts down the unit and protects your wine in case of high temperatures caused by condenser blockage. Controls temperature by enclosure air sensors or optional bottle probe. Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source *NOTE; WKC or WKCE models are in many different manufactures Wine cabinets many Wine cabinet units are modified in different forms please contact Breezaire direct for replacement information. All units are 115 Volt, 60 Hz Model Electrical Dimensions (in) Weight WKCE 2200* 4 AMP 18W x 10.5H x 16.6D 55lb *WKCE 2200 model is available in a 220v – 50 hz Model OPTIONS: Unit Modification: Special Order: Cord out the bottom (COB) Standard: Cord out the front Special Order: Hot air out the top (HAU) Standard: Hot air out rear of unit Bottle Probe 1) Both cabinet models come with the electric cord out the front (standard) or can be routed out the bottom near the rear of the unit (special order). 2) All cabinet units can be manufactured with the Hot Air out the rear (standard) or out the top of unit (special order). All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned.$1,144.00
Breezaire WKL3000 Wine Cellar Cooling Unit (for cellars up to 650cuft)
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series Wine Cellar Cooling systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III control system. Sentry III control system offers the following features: -Large, easy to read, cool green display. -Accurate, easy to adjust temperature set points with continuous display of cabinet temperature. -Power outage protection. -Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure. -Controls temperature by enclosure (cellar) air sensors or optional bottle probe. Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source. Model Enclosure Electrical Dimensions (in) Weight Volume (max) WKL 3000 650 cu.ft. 5 Amps 14.25W x 19.75H x 21.63D 76 lb. OPTIONS: Unit Modification: Special Order: Cord out the bottom (COB) Standard: Cord out the front Bottle Probe The WKL 2200 models are manufactured with the cold air out the front (standard) The 2200 thru 8000 models are manufactured with the hot air out the rear (standard) All six models come with the electric cord out the front (standard) or can be routed out the bottom (special order). The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front (Standard). The installer can configure the cold air to be routed out the top (as pictured below). All WKL model have a drain tube located in the base of the unit on the cold side. Breezaire can install a drain fitting on the rear of the unit. The drain fitting is for removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed with in 2 to 10 inches from unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run (Special Order) New WKL BLACK Series (upgrade) Not only have we changed the color we have made the base out of Stainless Steel. The BLACK series is a upgraded WKL model. All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned. WKL Installation Instructions Warranty Sentry Owners Manual$1,357.00
Breezaire WKL6000 Wine Cellar Cooling Unit (for cellars up to 1500cuft)
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series Wine Cellar Cooling systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III control system. Sentry III control system offers the following features: -Large, easy to read, cool green display. -Accurate, easy to adjust temperature set points with continuous display of cabinet temperature. -Power outage protection. -Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure. -Controls temperature by enclosure (cellar) air sensors or optional bottle probe. Model Enclosure Electrical Dimensions (in) Weight Volume (max) WKL 6000 1500 cu.ft. 9.5 Amps 16.25W x 22.00H x 22.25D 101 lb. Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source. OPTIONS: Unit Modification: Special Order: Cord out the bottom (COB) $170.00US Standard: Cord out the front Bottle Probe $80.00US The WKL 2200 models are manufactured with the cold air out the front (standard) The 2200 thru 8000 models are manufactured with the hot air out the rear (standard) All six models come with the electric cord out the front (standard) or can be routed out the bottom (special order). The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front (Standard). The installer can configure the cold air to be routed out the top (as pictured below). All WKL model have a drain tube located in the base of the unit on the cold side. Breezaire can install a drain fitting on the rear of the unit. The drain fitting is for removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed with in 2 to 10 inches from unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run (Special Order) New WKL BLACK Series (upgrade) Not only have we changed the color we have made the base out of Stainless Steel. The BLACK series is a upgraded WKL model. All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned. WKL Installation Instructions Warranty Sentry Owners Manual$2,048.00
Breezaire WKL2200 Wine Cellar Cooling Unit (for cellars up to 265cuft)
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series Wine Cellar Cooling systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III control system. Sentry III control system offers the following features: -Large, easy to read, cool green display. -Accurate, easy to adjust temperature set points with continuous display of cabinet temperature. -Power outage protection. -Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure. -Controls temperature by enclosure (cellar) air sensors or optional bottle probe. Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source. Model Enclosure Electrical Dimensions (in) Weight Volume (max) WKL 2200* 265 cu.ft. 4 Amps 14.25W x 13.25H x 16.38D 55 lb. *WKL 2200 & WKL 4000 models are is available in a 220v – 50 hz (Model WKL 2150 & WKL 3350) OPTIONS: Unit Modification: Special Order: Cord out the bottom (COB) Standard: Cord out the front Bottle Probe The WKL 2200 models are manufactured with the cold air out the front (standard) The 2200 thru 8000 models are manufactured with the hot air out the rear (standard) All six models come with the electric cord out the front (standard) or can be routed out the bottom (special order). The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front (Standard). The installer can configure the cold air to be routed out the top (as pictured below). All WKL model have a drain tube located in the base of the unit on the cold side. Breezaire can install a drain fitting on the rear of the unit. The drain fitting is for removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed with in 2 to 10 inches from unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run (Special Order) New WKL BLACK Series (upgrade) Not only have we changed the color we have made the base out of Stainless Steel. The BLACK series is a upgraded WKL model. All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned. WKL Installation Instructions Warranty Sentry Owners Manual$1,144.00
Breezaire WKSL4000 Split System Wine Cellar Cooling Unit (for cellars up to 1000cuft)
When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. The WKSL Series Wine Cellar cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed to, when installed in a properly constructed enclosure provide a constant selectable temperature between 48° and 63° Fahrenheit while maintaining 50 to 75 percent relative humidity. Model Enclosure Electrical Dimensions (in) Weight Volume (max) WKSL 4000 1000 cu.ft. 1.5 Amps 14.25W x 19.75H x 12.375D 45 lb. Fan/Coil WKSL 4000 1000 cu.ft. 7.5 Amps 14.25W x 19.75H x 12.375D 55 lb. Condenser WKSL Series systems are designed for easy installation by any, properly equipped and qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical sources. These systems must be charged with refrigerant during installation. The WKSL series uses the Sentry III digital control system for complete control of the enclosure conditions. There are two models to choose from: All units are 115 Volt, 60 Hz. *WKSL includes Fan/Coil & Condenser *WKSL 2200 & WKSL 4000 models are is available in a 220v – 50 hz (Model WKSL 2150 & WKSL 3350) OPTIONS: Unit Modification: The WKSL 4000 is shipped from the factory with the unit configured with the cold air routed out the front (standard) with the option of routing the cold air out the top by the installer. Warranty WKSL Installation Instructions Sentry Owners Manual$2,340.00
Breezaire Bottle Probe
Bottle Probe (Optional) The BREEZAIRE Bottle Probe can be use on WKCE, WKL, WKSL & WKE models. The bottle probe is used when you want to control the temperature of the wine cellar according to the liquid in the bottles. When the bottle probe is plugged into the unit it will take place of the internal air sensor. How to use the Bottle Probe: Allow the enclosure to stabilize at the desired temperature for several days (72hours). Using a normal size wine bottle clean bottle and then fill it with water insert the bottle probe into the bottle, and place it in the enclosure. Do not connect the bottle probe to the unit until the bottle has sufficient time to cool to the enclosure temperature (72 hours). Connect the bottle probe to the outlet located on the face of the unit. The on and off operation of the unit is now controlled by the temperature of the liquid in the bottle. The temperature displayed is that of the liquid in the bottle. Unplugging of the bottle probe will return the unit to the internal air sensor and will be reading the wine cellar temperature. The bottle probe cord is 5’ long. $80.00 US$80.00
Breezaire WKL1060 Wine Cellar Cooling Unit (for cellars up to 140cuft)
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series Wine Cellar Cooling systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III control system. Sentry III control system offers the following features: -Large, easy to read, cool green display. -Accurate, easy to adjust temperature set points with continuous display of cabinet temperature. -Power outage protection. -Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure. -Controls temperature by enclosure (cellar) air sensors or optional bottle probe. Enclosure Electrical Dimensions (in) Weight Model Volume (max) WKL 1060 140 cu.ft. 3 Amps 14.25W x 13.25H x 16.38D 45 lb. Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source. OPTIONS: Unit Modification: Special Order: Cord out the bottom (COB) Standard: Cord out the front Bottle Probe The WKL 2200 models are manufactured with the cold air out the front (standard) The 2200 thru 8000 models are manufactured with the hot air out the rear (standard) All six models come with the electric cord out the front (standard) or can be routed out the bottom (special order). The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front (Standard). The installer can configure the cold air to be routed out the top (as pictured below). All WKL model have a drain tube located in the base of the unit on the cold side. Breezaire can install a drain fitting on the rear of the unit. The drain fitting is for removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed with in 2 to 10 inches from unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run (Special Order) New WKL BLACK Series (upgrade) Not only have we changed the color we have made the base out of Stainless Steel. The BLACK series is a upgraded WKL model. All factory modification will be a longer lead-time, modification up-charge and may not be cancelled or returned. Sentry Owners Manual Warranty WKL Installation Instructions$1,011.00
Reviews
There are no reviews yet.