CellarPro 1800H Houdini Cooling Unit #25544

$3,495.00

Voltage *

SKU 1800H Categories ,

Description

CellarPro 1800H Houdini

 

1864 BTUH @ 55F.
CellarPro’s 1800H cooling unit (1/5 Ton Nominal) is the first cooling unit designed specifically for glass-enclosed wine cellars. Features include:.

  • Shallow height and depth
    • Fits shallow glass enclosures
    • 10 1/2″D x 10″H
    • 36 1/2″W
  • Can be placed inside the cellar, atop the cellar, partially installed in the cellar ceiling, or completely remote from the cellar (requires duct kit)
    • Choice of airflows for cold side
      • Intake from bottom or left side
      • Exhaust from bottom or front side
      • Air deflector optional
    • Choice of airflows for hot side
      • Intake from top or right side
      • Exhaust from the rear or the top side (the top exhaust offers 2 orientations)
      • Air deflector optional
  • Variable-speed fans with independent controls – choose between performance vs noise
    • Hot side – higher ambient temps require high fan speed
      • Low fan speed: 49 dBA / 85F maximum intake temperature
      • High fan speed: 55 dBA / 95F maximum intake temperature
    • Cold side – higher cooling load requires high fan speed
      • Low fan speed: 1456 BTUH @ 55F / 51F lowest achievable cellar temperature
      • High fan speed: 1864 BTUH @55F / 47F lowest achievable cellar temperature on hot, cold or both sides
  • Oversized stainless-steel drain pan with 100W heating element
    • Included as standard equipment
    • No drain line required for properly constructed, airtight cellars
    • Optional overflow drain fitting and 10′ flexible drain line
  • Choice of power source
    • Side or rear
    • Removable 10-ft cord
  • Electric light receptacle (3-amp)
  • Optional remote display
  • Optional bottle probe

Please note:
If the cooling unit is partially or fully exposed to an environment outside the cellar, especially if the cooling unit will be located in an unconditioned or warm, humid environment, we recommend insulating the left 13-inches of the cooling unit with 1-inch closed-cell foam insulation (R-4 or better).

 

 

DESCRIPTION:

CellarPro 1800H Cooling Unit (P/N 25544). CellarPro engineered the 1800H cooling unit specifically for shallow-depth glass wine cellars.

Just 10 1/2-inches deep and 10-inches tall, the 1800H Houdini cooling unit is designed to “disappear” inside – or atop – the cellar. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.

For example, assuming 75F ambient temperature, R13 insulation in the non-glass walls and no ducting, the 1800H would work in the following cellars:


Cellar Dims
Cellar
Cu Ft

Glass Sq Ft

Glass Pane
Cellar
Temp

BTUH
6’w x 2 1/2’d x 9’h13554 (Front Wall)Single60F1735
7’w x 2 1/2’d x 10’h17570 (Front Wall)Double55F1681
7’w x 2 1/2’d x 10’h175120 (Front & Side Walls)Double58F1922

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space – it must come from space outside the cellar.

Variable-speed fans with independent control provide maximum flexibility and versatility, as follows:

  • Variable fan speed for the cold side
    • Provides cooling flexibility
    • Low fan speed: 1456 BTUH @ 55F / 51F lowest achievable cellar temperature
    • High fan speed: 1864 BTUH @55F / 47F lowest achievable cellar temperature
  • Variable fan speed for the hot side
    • Choose between performance vs noise
    • Low fan speed: 49 dBA / 85F maximum intake temperature
    • High fan speed: 55 dBA / 95F maximum intake temperature

Powerful fans on the 1800H allow the cooling unit to be ducted without the need for an auxiliary fan, as follows:

  • Cold side:
    • Up to 50 equivalent feet (25′ per duct) with 6-inch insulated ducting
    • Intake from the left / exhaust from the front
  • Hot side:
    • Up to 50 equivalent feet (25′ per duct) and 85F maximum intake temperature (no auxiliary fan required)
    • Up to 100 equivalent feet (50′ per duct) and 95F maximum intake temperature (requires auxiliary fan)
    • Intake and exhaust from the top
  • Ducting requires CellarPro duct equipment (sold separately)

 

  • This unit can be configured to pull fresh air ranging from -20 to 95F. If the unit’s location does not provide sufficient room for the unit’s exhaust to dissipate and/or fresh air to be provided, you may need to purchase a rear duct kit. Fresh air intake below 40F will require the addition of a compressor heater, and fresh air intake below 20F also will require the addition of a fan cycling switch.
  • The unit must be placed indoors in an area that is above 32F.
  • Dual high-output fans come with independent variable speed settings for your choice of maximum cooling power at the high fan speed, or super-quiet operation (49 decibels) at the low fan speed.
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
  • Custom coils generate maximum cooling power inside the cellar.
  • Excess condensate is managed with a high-capacity stainless steel condensate pan and 100W electric heating element.
  • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
  • Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
  • Temperature set point range is 47F to 62F when the cooling unit is properly sized.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors.
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or right side of the cooling unit, providing flexibility for most installations.
  • Common dedicated 15-amp circuit is required to power the unit.
  • Mounting brackets, included as standard equipment, ensure easy installation.
  • Removable steel case provides access to the internal components for servicing and repair.
  • CellarPro’s 5-Year Standard Warrantythe most thorough in the industry, protects the unit against manufacturing defects.
  • An optional Extended Warranty (P/N 1836) is available for additional protection.
  • ETL Tested and Certified to rigorous UL Standards for safety (PENDING).

 

 

CONFIGURATIONS:

    • CellarPro 1800H cooling units are self-contained, fully-charged units designed to be attached to the ceiling inside the cellar, or above the cellar.
    • 1800H units also can be located remotely from the cellar with the addition of one of our front duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar and requires 6-inch (or greater) ducting from start to finish.
    • When calculating equivalent feet, each 90-degree turn counts for 8 feet.
    • For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
    • 1800H cooling units require fresh air intake without interference from the unit’s hot air exhaust. If sufficient space does not exist to provide fresh air, you may need our hot-side duct kit.
    • If the fresh air intake (on the hot side) will pull air below below 40F, the cooling unit will require our Compressor Heater (P/N 1727) .
    • If the fresh air intake (on the hot side) will pull air below 20F down to -20F, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater.
    • The cooling unit should never be exposed to temperatures below 32F.
    • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.
  • Capacity:1864 BTUH @ 55F
  • Size:36 1/2w x 10 1/2d x 10h (in)
  • Weight:99 lb
  • Power/Rating:115V AC / 60 Hz
    Compressor Amps:
    – Startup (LRA): 22.2 Amps
    – Unit Amp Rating: 4.7 Amps
    – Total Watts with Fans on High: 411
    – Total Watts with Fans on Low: 399
    – Compatible with Dedicated 15-Amp CircuitBTUH @ 55F:
    – Low Fan Speed: 1456 BTUH
    – High Fan Speed: 1864 BTUH
    1/4 Ton Nominal
  • Warranty:2 Years (Entire System) / 5 Years (Compressor)
    Optional Extended Warranty sold separately.
  • SKU:1800H
  • UPC:077757255441

OPTIONS:

Cold Temperature


Duct Hoods

  • Duct Hood (Hot or Cold Side) #25563 and Kit #25562: permits the cooling unit to be located remotely, up to 50 equivalent feet away from the cellar (cold side), and allows you to install the unit in a small space with limited airflow, up to 50 equivalent feet
  • Duct Kits are the same as Duct Hoods, and also include 2 x 25-feet of 6-inch insulated (R-6) flex ducting.
  • Sound Hood #30827: reduces the noise level of our Houdini cooling unit by 5 decibels; no assembly is required.


Remote Control & Probe

  • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
  • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
  • Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths.


Other Options & Upgrades

  • Condensate Drain Line: strongly recommended for wine cellar installations (but not required for wine cabinets), a drain line allows excess moisture to drain from the bottom (#7431) or rear (#1606) of the cooling unit.

 

CellarPro 1800 Series Enhanced Warranty #1835

CellarPro Bottle Probe #1434

Compressor Crankcase Heater #1727

Fan Cycling Switch #6972:

Remote Control and Display #1603:

Condensate Drain Line:

Condensate Drain Line plus Heating Element:

Duct Intake Hood (Cold Side) #1932

Duct Hood (Hot Side) #7409

Duct Kit (Hot Side) #1439:

 

Owners Manual 1800H ,     1800h-as-ducted-cut-sheet  CP 1800H Houdini Spec Sheet,    1800h-dimensions-cut-sheet,    1800h-control-locations-cut-sheet,    1800h-air-cutouts-cut-sheet,   Limited Warranty Policy