CellarPro 1800XT-220V 50/60 Hz Cooling Unit #27252 (for cellars up to 400cuft)
CellarPro 1800XT-220V 50/60 Hz Cooling Unit #27252 (for cellars up to 400cuft)
$2,250.00
Description
CellarPro 1800XTS 220V Cooling Unit (P/N 27252). CellarPro engineered the 1800XTS 220V cooling unit to maintain ideal temperature and humidity conditions in geographies that use 220V / 1 Phase power / 50 Hz.
All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space – it must come from space outside the cellar. Designed for indoor use, 1800XTS 220V units can operate in environments ranging from 35C to 4C out of the box. To operate the unit in colder temperatures, please see modifications listed on the Features tab.
1745 SENSIBLE BTUH @ 50Hz/12.8C.
CellarPro 1800XTS 220V cooling units (1/4 Ton Nominal) provide outstanding performance, adjustable humidity control and extra cooling power for use in 220V/1PH/50-Hz environments.
This cooling unit cannot be used in 60 Hz environments (eg North America).
Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).
CONFIGURATIONS:
- This unit offers a choice of top or rear hot exhaust.
- The 1800XT requires fresh air intake at the rear of the cooling unit.
- You must located this unit within the cellar, with the following exception: these units can be installed directly above the wine cellar when used with our front intake hood.
- The top and rear of this unit, where the hot air exhaust and fresh air intake occur, were not designed to be ducted.
- For installation in environments below 40°F, our compressor heater modification is required.
- For installation in environments below 20°F down to -20°F, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater.
- A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.
- This unit offers a choice of top or rear hot exhaust.
- Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
- Extra-large coils generate maximum cooling power.
- Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
- Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
- Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
- Temperature set point range is 8.3C to 16.7C when the cooling unit is properly sized.
- Unit operates with minimal vibrations and less noise (53 dBA @ 50Hz).
- Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
- 8-foot power cord exits from the rear .
- Removable steel case provides access to the internal components for servicing and repair.
- CellarPro’s 2-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
OPTIONS:
Cold Temperature
- Compressor Crankcase Heater #1727: protects the unit when installed in environments that drop down to -6°C.
- Fan Cycling Switch #6972: supports the unit in temperatures below -6°C and as low as -29°C when combined with our compressor heater.
Duct Hoods
- Duct Intake Hood (Cold Side)#1932: permits the cooling unit to be placed directly above the cellar.
Remote Control & Probe
- Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
- Extension cords available in 25-foot(#1780) and 50-foot (#1781)
Other Options & Upgrades
- Condensate Drain Line: strongly recommended for wine cellar installations (but not required for wine cabinets), a drain line allows excess moisture to drain from the bottom(#7431) or rear (#1606) of the cooling unit.
- Condensate Drain Line plus Heating Element: combined with a rear drain line, we add a 100W heating element to burn of excess moisture (#1881).
- Power Cord Modification #1098: normally the cord exits from the rear of the cooling unit, which generally is outside the cellar; this modification moves the cord to the front of the cooling unit, so that it can be plugged into an outlet inside the cellar.
- Mounting Clips #1095: attached to the front of CellarPro 1800 Series cooling units, these clips are designed to be bolted to the ceiling inside the wine cabinet / cellar.
CellarPro 1800 Series Enhanced Warranty #1835
1800 CellarPro Power Cord Modification #1098
CellarPro Mounting Clips 1800 2-Pk #1092-R
Compressor Crankcase Heater #1727:
Remote Control and Display #1603:
Condensate Drain Line plus Heating Element:
Duct Intake Hood (Cold Side) #1932
Flat rate subsidized Shipping in the Continental USA
Brand: CellarPro
Size: 46w x 42d x 27h (cm) (in)
Weight: 60 lbs
Power/Rating:
220V AC / 1PH / 50Hz
Compressor Amps:
– Running: 2.32 Amps
– Startup: 13.5 Amps
– Total Watts: 302
– Required: Dedicated 15-Amp Circuit
– Recommended: Surge Protector
This wine cooling unit can be used in 187-254V environments at 50Hz. The power plug provided is Nema 6-15P 15A 250V Plug (Male). It has a screw cover plug housing with internal lug connections, and can be swapped easily to conform to local plug configurations
Capacity: 1745 BTUH @ 50Hz / 12.8C
- In Business Since 1997
- Knowledgeable Customer Service
- Full Manufacturer Warranty
- In Business Since 1997
- Knowledgeable Customer Service
- Full Manufacturer Warranty