CellarPro 2000VSx Wine Cooling Unit (Exterior) #27057(for cellars up to 400cuft)

$3,695.00

SKU 2000VSx Categories ,

Description

CellarPro 2000VSx wine cellar cooling unit is an exterior unit for wine cellars up to 400 cubic feet.

  • 1886 BTUH @ 55F.
    CellarPro 2000VSx cooling units (1/4 Ton Nominal) are suitable for external installations from 20F to 110F and are designed for low profile installations in commercial and residential wine cellars up to 400 cubic feet* (see assumptions below).Features include:

    • Cold intake and exhaust exit from the front
      • Maximize racking below the cooling unit
      • Better air circulation inside the cellar
    • Low profile for maximum flexibility
      • Shallow height fits above doors: 13 1/4″ H
      • Shallow width fits in between studs: 14 1/8″ W
    • Upgrades for exterior exposure
      • Exterior weather hood to cover the rear of the cooling unit
      • Coated condenser coils
      • Cold-temperature compressor heater, allows exposure down to 20F
      • Reusable aluminum filter
      • Exterior-grade power cord
    • Variable-speed fan inside the cellar
      • 1886 BTUH on high fan speed
      • 1713 BTUH on low fan speed
    • Variable-speed fan outside the cellar
      • 110F maximum intake temperature / 61.5 dBA on the high fan speed
      • 100F maximum intake temperature / 55.5 dBA on the low fan speed
    • Condensate management system
      • Oversized stainless-steel drain pan
      • 1/2″ ID drain line for excess condensate
      • Optional 100W heating element
    • Choice of power source
      • Front or rear
      • Removable 10-ft cord
    • Optional remote display
    • Optional bottle probe
    • Optional fan-cycling switch allows exposure to temperatures down to -20F

    *400 cubic feet assumes

    • the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete),
    • the cooling unit is not ducted, a setpoint of 55F inside the cellar and
    • ambient temperatures up to 85F outside the cellar

DESCRIPTION:

CellarPro 2000VSx Cooling Unit (P/N 27057). CellarPro engineered the low profile 2000VSi cooling unit specifically for installations in wine cellars with limited space and exterior exposure for the hot side.

Just 14 1/8-inches wide and 13 1/4-inches tall, the 2000VSi cooling unit will fit in between studs and/or above door frames. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space – it must come from space outside the cellar.

Before purchasing this unit, let us calculate the thermal load of your wine cellar.

  • Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
  • Commercial-grade Electrofin coating protects the evaporator and condenser coils from leaks and corrosion.
  • Low profile for maximum flexibility
    • Shallow height fits above doors: 13 1/4″ H
    • Shallow width fits in between studs: 14 1/8″ W
  • Upgrades for exterior exposure
    • Exterior weather hood to cover the rear of the cooling unit
    • Coated condenser coils
    • Commercial-grade Electrofin coating protects the evaporator and condenser coils from leaks and corrosion.
    • Cold-temperature compressor heater, allows exposure down to 20F
    • Reusable aluminum filter
    • Exterior-grade power cord
  • Variable-speed fan inside the cellar
    • 1886 BTUH on high fan speed
    • 1713 BTUH on low fan speed
  • Variable-speed fan outside the cellar
    • 110F maximum intake temperature / 61.5 dBA on the high fan speed
    • 100F maximum intake temperature / 55.5 dBA on the low fan speed
  • Condensate management system
    • Oversized stainless-steel drain pan
    • 1/2″ ID drain line for excess condensate
    • Optional 100W heating element
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
  • Temperature set point range is 47F to 62F when the cooling unit is properly sized.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors.
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
  • Common dedicated 15-amp circuit is required to power the unit.
  • Our easy-access reusable aluminum air filter protects the condenser coils and increases the expected useful life of the cooling unit.
  • Adjustable mounting brackets, included as standard equipment, ensure easy installation.
  • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
  • CellarPro’s 5-Year Standard Warrantythe most thorough in the industry, protects the unit against manufacturing defects.
  • An optional Extended Warranty (P/N 1836) is available for additional protection.
  • ETL Tested and Certified to rigorous UL Standards for safety (PENDING).

 

CONFIGURATIONS:

  • CellarPro 2000VSx units are self-enclosed, fully-charged units designed to be installed through an external wall and sized to fit in between standard wall studs.
  • CellarPro 2000VSx units also can be located remotely from the cellar with the addition of one of our cold-side duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar and requires 6-inch (or greater) ducting from start to finish.
  • When calculating equivalent feet, each 90-degree turn counts for 8 feet.
  • For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
  • CellarPro 2000VSx units require fresh air intake at the rear of the cooling unit, and are designed to handle environments ranging from 20F to 110F
  • For installation in environments below 20F down to -20F, it will be necessary to add our Fan-Cycling Switch (P/N 6972).
  • The front of the cooling unit should never be exposed to temperatures below 32F.
  • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

 

OPTIONS:

Cold Temperature

          Compressor Heater #1727 :protects the unit when installed in environments that drop down to 20°F – INCLUDED.

  • Fan Cycling Switch # 6972: supports the unit in temperatures below 20°F and as low as -20°F when combined with our compressor heater.


Duct Hoods

  • Duct Hoods (Cold Side)(#7408 for low-humidity environments or #7427 for high-humidity environments) and Kits (#1476) for low-humidity environments or #7426 for high-humidity environments): permits the cooling unit to be located remotely, up to 50 equivalent feet away from the cellar.
  • Duct Kits are the same as Duct Hoods, and also include 2 x 25-feet of 8-inch insulated (R-6) flex ducting.


Remote Control & Probe

  • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
  • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
  • Extension cords available in 25-foot (#1780)and 50-foot (1781)

 

 

CellarPro VS Series Enhanced Warranty #1836

CellarPro Bottle Probe #1434

Compressor Crankcase Heater #1727

Fan Cycling Switch #6972:

Remote Control and Display #1603:

Duct Intake Hood (Cold Side) Low RH #7408

Duct Intake Hood (Cold Side) High RH #7427

Duct Intake Kit (Cold Side) Low RH#1476

Duct Intake Kit (Cold Side) High RH#7426

Duct Hood (Hot Side) #7407

Duct Kit (Hot Side) #1113:

 

Specs:

  • Capacity:1886 BTUH @ 55F
  • Size:14 3/4w x 27 7/8d x 13 3/8h (in)
  • Weight:81 lb
  • Power/Rating:115V AC / 60 Hz
    Compressor Amps:
    – Startup (LRA): 22.2 Amps
    – Unit Amp Rating: 4.52 Amps
    – Total Watts with Fans on High: 351
    – Total Watts with Fans on Low: 340
    – Compatible with Dedicated 15-Amp CircuitBTUH @ 55F:
    – Low Fan Speed: 1713 BTUH
    – High Fan Speed: 1886 BTUH
    1/4 Ton Nominal
  • Warranty:2 Years (Entire System) / 5 Years (Compressor)
    Optional Extended Warranty sold separately.
  • SKU:2000VSx
  • UPC:691054542938

 

Cut Sheet    Limited Warranty Policy    Duct Hood Front Cut Sheet    Owners Manual