CellarPro Split / AH Series Extended Warranty #7528
$795.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
SKU: 7528
Category: Split System Options
Product Description
CellarPro Split / AH Series Extended Warranty (SKU #7528). Designed to augment our standard warranty, our extended warranty increases and enhances coverage as follows:
- Covers all internal functioning parts supplied by CellarPro
- Pays labor for one (1) technician and parts which fail due to a mechanical or electrical breakdown. A mechanical or electrical breakdown is defined as the inability of a covered part to perform a routine function, when properly cleaned and serviced. Replacement of parts, if not supplied by CellarPro, must be of like kind and quality. A mechanical or electrical breakdown does not include a reduction in operating efficiency, or failure due to incorrect installation, misuse, abuse, or neglect.
- Diagnostic charges are limited to industry’s usual and customary rates, not to exceed one hour.
- Installing/servicing contractor agrees to provide labor for ninety (90) days from the date of installation or repair, along with any and all parts’ warranty coverage provided by the parts’ manufacturer.
Please note the following terms and conditions:
- A deductible of $99 will be charged per incident
- WARRANTY WILL NOT BE ACTIVATED UNTIL WE RECEIVE THE COMPLETED CHECKLIST AND INSTALLATION ISSUES (IF ANY) HAVE BEEN RESOLVED. If the unit is damaged because of improper installation, repair services will be provided on a time and materials basis.
- Owner/purchaser agrees to have the equipment installed and serviced by a qualified, properly licensed, technician. Owner/purchaser agrees to follow the recommended maintenance procedures outlined in the installation instructions. We recommend that you have a service agreement with your installer setup for a bi-yearly inspection and maintenance of your system. You must keep maintenance records validated by the servicing company, or keep receipts and work orders indicating dates and service provided. These records must be provided upon request by CellarPro.
- Scratches, blemishes and other cosmetic damage caused during transit and/or normal wear-and-tear are not covered by the extended warranty
- The extended warranty is available exclusively to residential customers in the continental U.S. for use in non-commercial applications
- The extended warranty is not available for 220V models
- The extended warranty does not cover accessories
- The extended warranty is not transferable
Description
CellarPro extended warranty coverage for Split and Air Handler Systems iincludes five (5) years of in-home coverage for the entire CellarPro cooling system.
- Increases the warranty period on the entire system from 2 to 5 years from the date of purchase
- Covers the cost of parts and labor to repair or replace defective parts during the warranty period
Cost: Price: $699.00 US
Only logged in customers who have purchased this product may leave a review.
Related Products
CellarPro 3200/4200 Replacement Air Filter 2-Pack #1121
CellarPro 3200/4200 Replacement Air Filter 2-Pack (P/N 1121). Poly-coated fiberglass air filters trap more dust particles than regular fiberglass filters. The frame is made of fiber-board and has two tin-plated steel grills (one bonded to each side) as well as sealed corners to prevent dust leakage. Filters are marked with size and airflow direction. Actual length and width are 3/8″ less than trade size shown. Filters meet UL Class 2 flame retardance requirements. Maximum temperature is 180 degrees. Sold in a pack of two filters. The filters fit CellarPro 3200 and 4200 wine cooling units, including the duct hood, and are for interior use only. Description Poly-coated fiberglass air filters are designed to fit all CellarPro 3200 and 4200 cooling units, and are for interior use only. Sold in a pack of two filters. Protects the condenser coils Can be used on 3200 and 4200 cooling units Designed for internal use only Replace after each use Size:12w x 12d x 1h (in) Weight:1.25lb Warranty:30 Days$25.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
CellarPro Bottle Probe #1434
CellarPro Bottle Probe (P/N X/10K-E-PO-7″-10’CL2P-M232 (1061 rev01)). Bottle probes are recommended when the wine cooling unit will be placed remotely (ie the cold air will be ducted), and/or it cannot be placed near the top of the wine cellar. The bottle probe also can be used in odd-shaped wine cellars to control the cooling unit based on temperatures “around the corner”. Our bottle probe, which includes a rubber bottle stopper to avoid leaks and spills, can be inserted into a wine bottle filled with water and alcohol to avoid bacteria growth. The 10-foot cord allows the bottle to be placed almost anywhere inside the wine cellar. The other side of the probe is fitted with a jack that plugs directly into the face of the wine cooling unit. Bottle Probe Operating Instructions: When measuring liquid temperatures, the (HY) differential should be set at 1 degree (so that the wine liquid doesn’t fluctuate more than 1 degree.) When measuring air temperatures, the (HY) differential should be set at 4 degrees (the cooling unit will burn out prematurely if the unit cycles on’off every time the air temperature changes by 1 degree.) The probe or bottle/probe must be located in a location with good air movement in order to correctly register the temperature changes inside the cellar. When measuring air temperature with ducted systems, the ideal location for the bottle probe is in the return air register; when measuring air temperature with through-the-wall systems, the ideal location for the bottle probe is near the return air grill; when measuring liquid temperatures in bottles, the ideal location of the bottle is near the top of the racks with good airflow. In all cases, it is recommended to check the actual cellar temperature against the display temperature when the bottle probe is first setup and subsequently whenever the location moves. Refer to our Owners Manual for instructions how to change the HY differential .Bottle probes are compatible with all CellarPro wine cooling units. Description Bottle probe temperature sensor allows our wine cooling units to cycle on/off based on changes in liquid temperature inside the wine cellar. Digital temperature control based on liquid temperature Jack plugs directly into the face of the wine cooling unit Rubber bottle stopper fits most wine bottles; prevents spills and leaks 10-ft cord allows maximum flexibility in placement of wine bottle Recommended when the wine cooling unit will be placed remotely or low in the wine cellar Also can be used in odd-shaped wine cellars Size:10 Ft Cord Weight:.5 lb Warranty:1 Year SKU:X/10K-E-PO-7″-10’CL2P-M232 (1061 rev01) Options: Bottle Probe Extension Cord 25 Ft #1780 Bottle Probe Extension Cord 50 Ft #1781$135.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
CellarPro VS Duct KIT (Hot Side) #1113
CellarPro 3200/4200 Duct Kit (Rear) (P/N 1113). Duct openings are designed to attach to two 8″ ducts for condenser intake and exhaust. Removable slot plate provides easy access to removable air filter. Kit includes: Duct hood and 50 feet (2×25) of 8-inch insulated (R-6) ducting. Please note: The high fan speed setting is required whenever the cooling unit is ducted. The diameter of the ducting must be 8-inches or greater from start to finish, and must not be reduced. Description: Custom duct hood for CellarPro 3200 and 4200 Series wine cooling units. With this kit, the hot air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Attaches easily to the rear of 3200 and 4200 wine cooling units Provides quick access to removable air filter Designed for easy hook-up to 8″ ducting One or both openings may be ducted (total of 100 equivalent feet) Powdercoated, cold-rolled, thick-gauge steel Configurations; The depth of the hood includes 2 1/4 inches for the 8-inch dia. duct adapters. The hood is designed to slide over the rear of the cooling unit, and will overlap the cooling unit by approximately 1 inch. Options: Capacity:100 Equivalent Feet Size:14 1/2w x 7 7/8d x 19 11/16h (in) Weight:42lb Warranty:1 Year UPC:691054542402 Duct Hood Rear Cut Sheet Framing Cutout Diagram Installation Diagrams Duct Hood Front Cut Sheet$375.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
CellarPro VS/Split Duct HOOD (Cold Side) Low RH #7408
CellarPro VS/Split Duct HOOD (Cold Side) Low RH (P/N 7408). Duct openings are designed to attach to two insulated 8-inch ducting (not included) for evaporator intake and exhaust. Custom design allows access to controls and switches on the face of the cooling unit. Requires 9 inches of additional height at the front of the cooling unit. Kit includes: Duct hood, remote display and bottle probe. Insulated 8-inch or greater (required from start to finish) ducting is not included. Bottle Probe Operating Instructions: When measuring liquid temperatures, the (HY) differential should be set at 1 degree (so that the wine liquid doesn’t fluctuate more than 1 degree.) When measuring air temperatures, the (HY) differential should be set at 4 degrees (the cooling unit will burn out prematurely if the unit cycles on’off every time the air temperature changes by 1 degree.) The probe or bottle/probe must be located in a location with good air movement in order to correctly register the temperature changes inside the cellar. When measuring air temperature with ducted systems, the ideal location for the bottle probe is in the return air register; when measuring air temperature with through-the-wall systems, the ideal location for the bottle probe is near the return air grill; when measuring liquid temperatures in bottles, the ideal location of the bottle is near the top of the racks with good airflow. In all cases, it is recommended to check the actual cellar temperature against the display temperature when the bottle probe is first setup and subsequently whenever the location moves. Refer to our Owners Manual for instructions how to change the HY differential Description; Custom duct hood for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Only recommended for use in low humidity environments. Please use our high-humidity duct hood if the system will be used in a warm, moderate or high humidity environment. Attaches easily to the front of 3200/4200 VS and 3000S/4000S Split refrigeration systems Designed to be used in Low Humidity environments Provides access to cooling unit control panel and switches Designed for easy hook-up to insulated 8″ ducting (not included) One or both openings may be ducted (total of 100 equivalent feet) Maintains accurate temperatures inside the wine cellar Includes our remote thermostat bottle probe (measures air or liquid temperatures) Includes our remote control display kit Configurations; Please note: This kit is recommended for low humidity environments. Please use our high humidity duct hood if the system will be used in a warm, high humidity environment. Be sure to refer to our ducting heat loss table and our duct correction table when sizing the cooling unit. The high fan speed setting is required when our unit is ducted. Installation Instructions – Split High Humidity Front Duct Hood Framing Cutout Diagram Front – Rear Drawings As Ducted Installation Diagrams$650.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
CellarPro 3200/4200 Reusable Aluminum Air Filter #1122
CellarPro 3200/4200 Reusable Aluminum Air Filter (P/N 2061K23). Multiple layers of expanded, corrugated aluminum sheets are stacked in staggered directions to let dust and dirt deep into the filter. The filters are reusable, and can be cleaned with steam or hot water spray. After cleaning, a Tackifier spray (Item #15224) can be applied to improve filtration. Actual length and width are 3/8″ less than the size shown. Filters meet UL Class 2 flame retardance requirements. Maximum temperature is 240 degrees. These aluminum filters fit all CellarPro 3200 and 4200 wine cooling units, and are designed for interior or exterior use. Description Reusable aluminum air filter fits all CellarPro 3200 and 4200 wine cooling units and is designed for interior or exterior use. Aluminum filter and frame Designed for internal or external use Can be cleaned and reused Fits all CellarPro 3200 and 4200 cooling units Protects condenser coils from dirt buildup Size:12 x 12 x 1 (in) Weight:1lb Warranty:30 Days SKU:2061K23 (1115)$58.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
Line Set for CellarPro Split 6000S or 8000S #1807
Line Set for CellarPro Split 6000S or 8000S (P/N 61030250L). Each set consists of a copper liquid line and an insulated copper suction line. The larger tube (5/8 ODS), called the suction line, is insulated with 3/4-inch continuous seamless insulation. The smaller tube (3/8 ODS) is called the liquid line. Both tubes are rolled into a convenient all-in-one package for field installation. Line sets can be brazed together with couplings to achieve lengths up to 100 feet. Description Our25-foot line set is designed to connect the evaporator and condensing units in Cellarpro Split 6000S refrigeration systems from 25 to 100 feet, and CellarPro 8000S refrigeration systems from 25 to 50 feet. Designed to Work with CellarPro Split 6000S and 8000S Refrigeration Systems 100% Pre-Fabricated for Quick, Efficient & Economical Field Installation Tested to be Defect-Free in Accordance with ASTM E243 U.L. recognized or listed Size:25 Feet Weight:14lb Warranty:1 Year SKU:61030250L$205.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
CellarPro Heat Exchanger Small #1800
CellarPro Heat Exchanger (P/N HXR-50). Designed for CellarPro Split and Air Handler Split Systems from our 30000S up to our AH8500Sx, our refrigerant heat exchanger s required when the vertical up (ie the evaporator is above the condensing unit) liquid line runs over 30 feet (60 ft maximum up). Vertical down (ie the evaporator is below the condensing unit) liquid lines do not require a heat exchanger. Our heat exchanger uses a coaxial design for optimum heat transfer. The dimensions are 3/8″ for the liquid line and 5/8″ for the suction line. Customers can use adaptors to match differing lineset diameters. Description Liquid subcoolers are recommended for split system installations with vertical up (ie the evaporator is above the condensing unit) liquid line runs over 30 feet. Coaxial design for optimum heat transfer Sizes to fit 1/3 to 80 H.P. capacity systems 1/3 H.P. through 10 H.P. constructed with copper outer tube and red brass inner tube 15 H.P. through 80 H.P. constructed with steel outer tube and stainless steel inner tube Design working pressure 450 PSIG Burst pressure 2250 PSIG 3/8″ liquid, 5/8″ suction – adaptable in field U.L. recognized or listed Size:13w x 5/8d x 2 5/16h (in) Weight:5 lb Warranty:1 Year SKU:HXR-50 (1705)$80.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
CellarPro VS Duct HOOD (Hot Side) #7407
CellarPro 3200/4200 Duct HOOD (Rear) (P/N 7407). Duct openings are designed to attach to two 8″ ducts (not included) for condenser intake and exhaust. Removable slot plate provides easy access to removable air filter. Please note: The high fan speed setting is required whenever the cooling unit is ducted. The diameter of the ducting must be 8-inches or greater from start to finish, and must not be reduced. Description: Custom duct hood for CellarPro 3200 and 4200 Series wine cooling units. With this hood and a minimum of 8-inch ducting from start to finish (not included), the hot air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Attaches easily to the rear of 3200 and 4200 wine cooling units Provides quick access to removable air filter Designed for easy hook-up to 8″ ducting (not included) One or both openings may be ducted (total of 100 equivalent feet) Powdercoated, cold-rolled, thick-gauge steel Configurations; The depth of the hood includes 2 1/4 inches for the 8-inch dia. duct adapters. The hood is designed to slide over the rear of the cooling unit, and will overlap the cooling unit by approximately 1 inch. Options: Capacity:100 Equivalent Feet Size:14 1/2w x 7 7/8d x 19 11/16h (in) Weight:13lb Warranty:1 Year Framing Cutout Diagram Installation Diagrams Duct Hood Front Cut Sheet Duct Hood Rear Cut Sheet$265.00
Product added!
Browse Wishlist
The product is already in the wishlist!
Browse Wishlist
Reviews
There are no reviews yet.