Product Description
Low 2” Shelf Bracket
Adding a glass, wood or metal shelf atop any Island Display Rack adds valuable space to show off more products to your customers.
DESCRIPTION:
Adding a glass, wood or metal shelf atop any Island Display Rack adds valuable space to show off more products to your customers. These six-inch brackets give you all the hardware and support you need to add your own shelf.
Specifics:
- Adds the ability to place a shelf 2 inches above any IDR3 or IDR4 rack
- Two steel supports included
- Finishes to match any IDR
- Shelf not included
OPTIONS:
Satin Black- IDR-SLB-K
Brushed Nickel- IDR-SLB-P
Additional information
| Metal |
|---|
Only logged in customers who have purchased this product may leave a review.
Related Products
Designer Series – Open Diamond Cube
Designer Series – Open Diamond Cube The Open Diamond Cube is similar to the Solid Diamond Cube, but is constructed of more affordable 1×2’s and does not include face trim for a significant cost savings. Each wooden wine rack is 1 column wide x 3 cubes high. Each cube is comprised of 4 quadrants holding 10 bottles each. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 72″ width – 23-3/16″ depth – 13-1/2″ bottle capacity – 132 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. Assembly Manual$367.45 – $623.66
Table Top, Display and Stemware Rack
Table Top, Display and Stemware Rack (F11-C + F12-C + F13-C) RedRack 21 Glasses Beautiful ALL HEART CALIFORNIA REDWOOD Incredibly affordable Luxurious style Fits 32″ and 2×16″ modules Ideal over a TABLE TOP Easy installation Accommodates typical glasses DESCRIPTION: 2”h x 32”w x 8”d Weight: 3 lbs OPTIONS: F11C Table Top 32”w x 9”d$36.00 – $66.00
Designer Series – Curved Corner
Designer Series – Curved Corner Use the 90 degree Curved Corner wooden wine rack to make that transition from wall to wall. It allows you to store wine through the corner and take advantage of that space. This corner treatment adds a decorative touch to your wine cellar. Each curve is comprised of 4 columns x 19 rows of individual bottle style wine racking. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Dimensions: height – 72″ width – 24-15/16″ depth – 24-15/16″ bottle capacity – 76 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. Assembly instructions$377.97 – $900.20
Designer Series Rectangular Bin and Case Storage
Designer Series Rectangular Bin and Case Storage Our versatile Rectangular Bin and Case wooden wine rack can store 7 wood cases with an additional one on top, or store uncrated bottles in the compartments. Perfect for easy wine storage when you receive shipments from your wine club. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 73 1/2″width – 26-11/16″depth – 13-1/2″bottle capacity – 153 or 7 wood cases KIT SERIES UPGRADES Spacer Bars: Spacer bars come with a dado that comfortably fits each column of your racking. Putting together the racks can be done with the nails provided, or you can utilize a brad nailer for faster assembly. Note that if you choose to assemble your racks with screws, you will need to pre-drill and countersink the holes to avoid the accidental splitting of the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. With these rails, your bottles are stored securely above the floor level so they do not break accidentally by hitting a hard floor. Added to this,, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail. Assembly Guide$294.11 – $646.12
8 Column Individual Bottle Wine Rack
8 Column Individual F01-A + B RedRack 96 bottles Beautiful ALL HEART CALIFORNIA REDWOOD RedRack may be stacked on top of one another or placed side by side. 2 heights are available: 32″ (A) and 48″ (B). We offer 2 main sizes in widths: 16″ and 32″ (only wood case modules are 24″) to allow for a number of configurations. RedRack wine racking sits 2 3/4″ away from the wall for a total of 9″ depth. Some assembly required. Incredibly affordable Luxurious style Modular system Stackable and expandable Easy installation Variety of accessories available DESCRIPTION: 48”h x 32”w x 9”d Weight: 13lbs OPTIONS: FO1A 8 Column Individual Bottle Wine Rack 32”h x 32”w x 9”d RedRack_individual_ Assembly Instructions$108.00 – $150.00
Designer Series – 2 Column Individual
Designer Series – 2 Column Individual The 2 Column Individual Bottle wine rack supports the same design as the 5 Column Individual Bottle wine rack, but in a smaller width. Each bottle is cradled on two rails that are cut with beveled ends and rounded edges which ensure the labels will not tear when the bottles are removed. The 2 Column Individual Bottle wine rack is 2 columns wide x 20 rows high. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 72″ width – 9-11/16″ depth – 13-1/2″ bottle capacity – 40 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail.$214.99 – $351.70
Designer Series – 2 Column Individual with Display
Designer Series – 2 Column Individual with Display DESCRIPTION: The 2 Column Individual Bottle with Display Row wine rack combines all the features of the standard 2 Column Individual Bottle wine rack with the added benefit of display rows. The 15 degree angle of the wine display row keeps the cork moist while allowing you to easily view the label. Each display rack is 2 columns wide x 19 rows high with 2 bottles of display. Product requires assembly. Please note: molding packages are available separately. Full wine bottle depth coverage at 13 1/2″ deep Beveled ends and rounded edges Labels are safe from tearing Mix and match components Made in the USA Specs height – 72″ width – 9-11/16″ depth – 13-1/2″ bottle capacity – 38 Spacer Bars: Spacer bars are sent with a dado that snugly fits each column of your racking. You can assemble the rack with the nails provided, or you can utilize a brad nailer for faster assembly. If you would prefer to assemble your rack with screws you will need to predrill and countersink the holes to ensure you do not split the material. Bottom Rail: All the racks in this Series have a 1 7/16″ square cut bottom rail. This allows the bottles to be securely held above the floor level so the bottle does not break accidentally by hitting a hard floor. In addition, the base molding supplied with this Series is 1 7/16″ high and can be applied directly to the front of this rail.$214.99 – $351.70
Concave and Convex Base or Crown
Concave and Convex Base or Crown RedRack Beautiful ALL HEART CALIFORNIA REDWOOD TRIM Incredibly affordable Luxurious style Adds the finishing touch Reversible: base or crown Easy installation Black crystal finish Sturdy yet elegant Compensates floor imperfections DESCRIPTION: 1.75”h x 20”w x 20”d Weight: 4 lbs OPTIONS: F17C Convex Base or Crown 1.75”h x 20”w x 20”d$38.00
Reviews
There are no reviews yet.