Product Description
WhisperKool Slimline Series cooling units are the industry standard for wine cellar contractors. Designed for simple installation, the Slimline Series provides an economical solution to your climate control needs in a compact self-contained system that can be mounted directly above a door..
The Slimline is WhisperKOOL’s quietest interior venting self contained unit available. Developed to mount in a living area and designed to fit into the often unused space between the cellar door and ceiling, giving the collector maximum storage capacity. The system is equipped with WhisperKOOL’s Platinum Series controller utilizing Advanced System Protection Technology. This features a series of strategically placed monitoring probes, which insure efficient performance and long cooling unit life. With efficiency in mind, the Slimline uses less power than most traditional units while having the ability to cool cellars up to 350 cubic feet.
Specifications
Cellar Size:
350 cu. ft. (Properly Insulated Cellar)
dBA:
Evaporator: 59 Decibels
Condensor: 53 Decibels
Dimensions:
22″w x 10.25″h x 19″d
Weight:
50 lbs
AMPS (starting/running):
17.5/3.5
Installation:
Through-the-Wall, ideally above a doorway
Temp. Delta:
30°F temperature differential
Thermostat:
Advanced Digital Control Display
Warranty:
2 Year Parts and Labor/ 5 Year Compressor
Standard Features:
- Quiet and efficient Operation
- Advanced Electronic Display
- Liquid Bottle Probe
- Humidity control
- Energy saving mode
- Can be mounted above the door
- 30°F temperature differential
BTUh Rating:
There are circumstances in which a cellar design may require a larger unit due to some existing design restrictions. There are several factors such as glass, stone, concrete, etc. which will seem adequate but do not offer the insulation capacity required to maintain the optimum environment. We recommend purchasing a unit with a larger capacity to compensate for the design limitations. Under sized cooling units can lead to pre-mature failure and/or prevent the system from reaching the desired set temperature. As a result they are not covered under warranty.
Only logged in customers who have purchased this product may leave a review.
Related Products
Cold Weather Start Kit
Introducing the Cold Weather Start Kit by WhisperKOOL. This kit was designed exclusively for our split-systems where the condensing unit will be installed in extremely cold environments. Our split systems are designed to be adaptable to almost any install, as the condensing unit can be located in a variety of locations such as a mechanical room, basement, back yard, or even a rooftop. Our split systems were designed to operate with the condensing unit exposed to temperatures between 20° F and 110° F. However, there are some areas in the country that may drop below 20° F. Due to these conditions WhisperKOOL designed the Cold Weather Start Kit. So, when the outside temperatures drop, the pressure in the system drops as well. This presents a challenge because our systems operate using a pump down cycle and a low pressure switch to turn the compressor on and off. However, when the temperature drops below 20° F the pressure in the system is too low to start the compressor. The use of an electronic bypass is needed to start the compressor and temperature controlled heaters installed on the receiver are needed to raise the pressure in the system to optimal levels. The Cold Weather Start Kit will bypass the low pressure switch on startup and keep the pressure in the system high enough to operate correctly for environments as cold as -15° F. It is important that the cooling system stays operational during cold weather conditions, as heating the house using the central HVAC system will indirectly increase the temperature of the wine cellar. This kit will ensure that the cooling system will continue to operate efficiently in cold weather environments to maintain an optimal wine storage temperature. https://youtu.be/hvY5yYFAtL4 OPTIONS: * System: Platinum Mini Split Platinum Split 4000 (before 01/07/15) Platinum Split 4000 (after 01/07/15) Platinum Split 8000 (after 01/07/15) Mini Ceiling Mount Ceiling Mount 4000 (before 01/07/15) Ceiling Mount 4000 (after 01/07/15) Ceiling Mount 8000 (after 01/07/15) Ceiling_Mount_4000_Installation_Guide Ceiling_Mount_8000_Installation_Guide Mini_Ceiling_Mount_Installation_Guide Mini_Platinum_Split_Installation_Guide Platinum_Split_4000_Installation_Guide Platinum_Split_8000_Installation_Guide$359.00
Condensate Pump Kit
The condensate pump kit is designed as an automatic condensate removal pump for water dripping out of our cooling units’ drain line. The pump is controlled by a float/switch mechanism that turns the pump on when approximately 2-1/4” of water collects in the tank, and automatically switches off when the tank drains to approximately 1-1/4”. The condensate pump kit allows the excess condensate to be pumped up to 20ft away from the unit. Key Features: Fully Automatic 1/2 gallon leakproof, rustproof, high impact ABS tank 3 drain holes Removable 3/8″ barbed check valve New generation float arm for enhanced reliability Thermal overload protection Suitable for High-Efficiency, Gas-Fumace Condensate ABS plastic motor and tank cover, and volute Polypropylene Impeller Stainless steel shaft Snap-action switch Easy installation UL & CSA listed Specifications Dimensions: 5″w x 7″h x 11″d Weight: 4.6lbs AMPS: 1 Watts: 60 Hertz: 60 Voltage: 115 Flow: 65GPH @ 1′ of Head Horsepower: 1/50$169.00
Extreme 8000ti (for cellars up to 2,000cuft)
Years of experience working within the wine cellar industry have inspired us to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – our highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. DESCRIPTION: The Extreme 8000ti introduces variable speed fans to WhisperKOOL’s most advanced and powerful self-contained cooling system. Utilizing variable speed fans this high capacity unit can maintain optimal cellar condi- tions while operating at a quiet 57 decibels. The Extreme is designed to fit between standard wall studs for simple “through-the-wall” installation with minimum modification to existing wall structures. Extremes are acceptable for mounting through an exterior wall and can operate in a 110°F exhaust environment. The ti Series includes our most advanced controller utilizing Advanced System Protection Technology. This features a series of strategically placed monitoring probes, which ensure efficient performance and long cooling unit life. This system is designed to maintain 55°F and 50-70% relative humidity in a cellar up to 2000 cubic feet in size. Specifications Cellar Size: up to 2000 cu. ft. (Properly Insulated Cellar) dBA: Condenser side:: High: 61 Decibels Med: 59 Decibels Low: 57 Decibels dBA: Evaporator side:: High: 60 Decibels Med: 59 Decibels Low: 57 Decibels Dimensions: 14.25″W x 22″H x 27.5″D Weight: 150lbs. AMPS (starting/running): 36/10 Installation: Through-the-Wall, partially ducted, fully ducted Temp. Delta: 55°F temperature differential Thermostat: Digital Control Display Outside Venting: Can be done if the outside temperature does not exceed 110°F, the external grille cover is highly recommended. Ducting Options: Unit can be fully ducted. Warranty: 2 year parts and labor / 5 year compressor System Features: Selectable 3-speed fans Reliable starting and running performance, even under the most extreme outdoor conditions Fits neatly between wall studs for quick and simple installation Advanced electronic display Liquid bottle probe Two year parts and labor warranty Maintains 55 degrees in cellars up to 800 cu ft. Designed to blend seamlessly within cellar racking Oversized coils Quiet operation technology delivers sound levels as low as 51 db. Durable finish 30°F temperature differential Superior Operating Flexibility In hotter climates where outside temperatures can be over 110°F. In cold climates where winter temperatures prevent other units from operating effectively In limited spaces where ventilation is a problem Perfect for ducting and/or installation into remote locations. The Extreme Series wine cellar cooling units are designed to operate effectively in environmental conditions that cause traditional cooling units to fail. BTUh Rating: There are circumstances in which a cellar design may require a larger unit due to some existing design restrictions. There are several factors such as glass, stone, concrete, etc. which will seem adequate but do not offer the insulation capacity required to maintain the optimum environment. We recommend purchasing a unit with a larger capacity to compensate for the design limitations. Under sized cooling units can lead to pre-mature failure and/or prevent the system from reaching the desired set temperature. As a result they are not covered under warranty. OPTIONS: Option Details The Exterior Grille protects the exhaust side of the system from the weather elements when installed through an exterior wall. The Exhaust Plenum allows the warm exhaust air to be ducted to another area. Ideal if the room adjacent to your cellar is not ideal for warm air to be exhausted into. This also allows you to duct the condenser supply air from an alternate location. * Ducting Upgrade: No Ducting Plenum Duct Plenum ( $149) * Grille Option: No Exterior Grille Exterior Grille ( $169) https://youtu.be/4ktsQqpT59A Extreme_ti-Product_Sheet Extreme_Owner_Manual Warranty Extreme Series$3,739.00
SC Pro 4000 (for cellars up to 1,000cuft)
Description The WhisperKool SC PRO 4000 Series embodies the latest and greatest system design technologies in an all-new housing design. Developed upon feedback directly from customers and installers, the unit incorporates a variety of high-end components at an affordable price point. By combining powerful airflow with quiet operation technology, the SC PRO is unrivaled when it comes to efficiently cooling small to mid-sized wine cellars. What separates the original SC Series from the SC PRO Series? The SC PRO comes complete with a new, blower fan system that optimizes performance while operating at a significantly lower noise level. It also reintroduces a condensate management system, which effectively evaporates up to 3oz. of water an hour. This management system renders the drain line as an additional safeguard rather than a definite need. The SC PRO Series will be a direct replacement for the SC Series, and its predecessor, one of the most well-known cellar cooling units, the XLT. Standard Features: Advanced blower fans Condensate management system Smart refrigerant metering Liquid-temperature-measuring bottle probe Advanced digital controller Coated evaporator coil Front or rear power switch Single-piece mounting bracket Specifications Cellar Size: Approx. 1000 cu. ft. when cellar is fully insulated and sealed with proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit) BTU/h w/85°F air entering condenser coil: 2253 Dimensions: 17.5″L x 14.25″W x 15.75″H Refrigerant: R-134a HP: 1/6+ Voltage Rating: 115V (20-amp dedicated circuit required); 230V (subject to availability) Weight: 65 lbs Amps: 3.7 (running amps) Drain Line: 1/2″ ID clear plastic tubing Installation: Through-the-wall, partially ducted Thermostat: Advanced digital controller, liquid-temperature-measuring bottle probe (retractable cable) Temp. Delta: Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature Ducting Options: Exhaust air can be ducted using the optional ducting kit Warranty: Two-year limited warranty (parts and labor) / Five-year limited warranty (compressor) BTU/H Rating 2253 The BTU/h value shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.) which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature. OPTIONS: * Ducting Upgrade: No Ducting Kit Ducting Kit * Grille Option: No Exterior Grille Exterior Grille WK-SC_PRO-Series-OM SC-pro-2000_3000_4000_8000 Product Warranty$2,279.00
SC Pro 8000 (for cellars up to 2,000cuft)
Description The WhisperKool SC PRO 8000 Series embodies the latest and greatest system design technologies in an all-new housing design. Developed upon feedback directly from customers and installers, the unit incorporates a variety of high-end components at an affordable price point. By combining powerful airflow with quiet operation technology, the SC PRO is unrivaled when it comes to efficiently cooling small to mid-sized wine cellars. What separates the original SC Series from the SC PRO Series? The SC PRO comes complete with a new, blower fan system that optimizes performance while operating at a significantly lower noise level. It also reintroduces a condensate management system, which effectively evaporates up to 3oz. of water an hour. This management system renders the drain line as an additional safeguard rather than a definite need. The SC PRO Series will be a direct replacement for the SC Series, and its predecessor, one of the most well-known cellar cooling units, the XLT. Self-Contained – SC PRO 8000 Advanced blower fans Condensate management system Smart refrigerant metering Liquid-temperature-measuring bottle probe Advanced digital controller Coated evaporator coil Front or rear power switch Single-piece mounting bracket Specifications Cellar Size: Approx. 1500 cu. ft. when cellar is fully insulated and sealed with proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit) BTU/h w/85°F air entering condenser coil: 4241 Dimensions: 21.64″L x 14.25″W x 22.56″H Refrigerant: R-134a HP: 1/2 Voltage Rating: 115V (20-amp dedicated circuit required); 230V (subject to availability) Weight: 65 lbs Amps: 3.7 (running amps) Drain Line: 1/2″ ID clear plastic tubing Installation: Through-the-wall, partially ducted Thermostat: Advanced digital controller, liquid-temperature-measuring bottle probe (retractable cable) Temp. Delta: Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature Ducting Options: Exhaust air can be ducted using the optional ducting kit Warranty: Two-year limited warranty (parts and labor) / Five-year limited warranty (compressor) BTU/H Rating 4241 The BTU/h value shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.) which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature. OPTIONS: * Ducting Upgrade: No Ducting Kit Ducting Kit * Grille Option: No Exterior Grille Exterior Grille Product Warranty SC-pro-2000_3000_4000_8000 WK-SC_PRO-Series-OM$3,109.00
SC Pro 3000 (for cellars up to 650cuft)
Description The WhisperKool SC PRO 3000 Series embodies the latest and greatest system design technologies in an all-new housing design. Developed upon feedback directly from customers and installers, the unit incorporates a variety of high-end components at an affordable price point. By combining powerful airflow with quiet operation technology, the SC PRO is unrivaled when it comes to efficiently cooling small to mid-sized wine cellars. What separates the original SC Series from the SC PRO Series? The SC PRO comes complete with a new, blower fan system that optimizes performance while operating at a significantly lower noise level. It also reintroduces a condensate management system, which effectively evaporates up to 3oz. of water an hour. This management system renders the drain line as an additional safeguard rather than a definite need. The SC PRO Series will be a direct replacement for the SC Series, and its predecessor, one of the most well-known cellar cooling units, the XLT. Self-Contained – SC PRO 3000 Advanced blower fans Condensate management system Smart refrigerant metering Liquid-temperature-measuring bottle probe Advanced digital controller Coated evaporator coil Front or rear power switch Single-piece mounting bracket Specifications Cellar Size: Approx. 650 cu. ft. when cellar is fully insulated and sealed with proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit) BTU/h w/85°F air entering condenser coil: 2049 Dimensions: 17.5″L x 14.25″W x 15.75″H Refrigerant: R-134a HP: 1/6 Voltage Rating: 115V (20-amp dedicated circuit required); 230V (subject to availability) Weight: 65 lbs Amps: 2.9 (running amps) Drain Line: 1/2″ ID clear plastic tubing Installation: Through-the-wall, partially ducted Thermostat: Advanced digital controller, liquid-temperature-measuring bottle probe (retractable cable) Temp. Delta: Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature Ducting Options: Exhaust air can be ducted using the optional ducting kit Warranty: Two-year limited warranty (parts and labor) / Five-year limited warranty (compressor) BTU/H Rating 2049 The BTU/h value shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.) which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature. OPTIONS: * Ducting Upgrade: No Ducting Kit Ducting Kit * Grille Option: No Exterior Grille Exterior Grille SC-pro-2000_3000_4000_8000 WK-SC_PRO-Series-OM Product Warranty$2,129.00
Exterior Condenser Housing
Protects the condenser portion of the split system from the elements when installed outdoors. Exterior Condenser Housing is used with the Platinum Mini Split, Platinum Split Wall Mount and Platinum Split Fully Ducted. Key Features : Galvanized Steel Base Galvanized Steel Cabinet Embossed — 20 GA Hinged Access for Easier Servicing Wind Safety Latch — See Insert Shipped Knocked Down for Convenient Warehousing Easily Assembled in the Shop or on the Job All Front Louver are at a 45° degree Angle Rain Trough Under Hinge to catch moisture that might seep through hinge Necessary Fastners Provided Specifications Dimensions:: 20″w x 20″h x 27″d$339.00
Extreme 5000ti (for cellars up to 1,000cuft)
Years of experience working within the wine cellar industry have inspired us to create a design capable of overcoming a range of installation challenges which limit the performance and longevity of a traditional cooling unit. Welcome to the Extreme Series – our highest end, professional grade cooling unit utilizing state of the art, high quality components. The system is designed for Powerful Operation, Efficiency, High Reliability and Longevity with excellent performance in a wide range of working environments. DESCRIPTION: The Extreme 5000ti introduces variable speed fans to WhisperKOOL’s most advanced and powerful self-contained cooling system. Utilizing variable speed fans this high capacity unit can maintain optimal cellar condi- tions while operating at a quiet 57 decibels. The Extreme is designed to fit between standard wall studs for simple “through-the-wall” installation with minimum modification to existing wall structures. Extremes are acceptable for mounting through an exterior wall and can operate in a 110°F exhaust environment. The ti Series includes our most advanced controller utilizing Advanced System Protection Technology. This features a series of strategically placed monitoring probes, which ensure efficient performance and long cooling unit life. This system is designed to maintain 55°F and 50-70% relative humidity in a cellar up to 1000 cubic feet in size. Specifications Cellar Size: up to 1000 cu. ft. (Properly Insulated Cellar) dBA: Condenser side: High: 63 Decibels Med: 57 Decibels Low: 52 Decibels dBA: Evaporator side: High: 62 Decibels Med: 58 Decibels Low: 52 Decibels Dimensions: 14.25″W x 15.75″H x 28″D Weight: 115lbs. AMPS (starting/running): 32/9 Installation: Through-the-Wall, Partially Ducted, Fully Ducted Temp. Delta: 55°F temperature differential Thermostat: Digital Control Display Outside Venting: Can be done if the outside temperature does not exceed 110°F, the external grille cover is highly recommended. System Features: Selectable 3-speed fans Reliable starting and running performance, even under the most extreme outdoor conditions Fits neatly between wall studs for quick and simple installation Advanced electronic display Liquid bottle probe Two year parts and labor warranty Maintains 55 degrees in cellars up to 800 cu ft. Designed to blend seamlessly within cellar racking Oversized coils Quiet operation technology delivers sound levels as low as 51 db. Durable finish 30°F temperature differential Superior Operating Flexibility In hotter climates where outside temperatures can be over 110°F. In cold climates where winter temperatures prevent other units from operating effectively In limited spaces where ventilation is a problem Perfect for ducting and/or installation into remote locations. The Extreme Series wine cellar cooling units are designed to operate effectively in environmental conditions that cause traditional cooling units to fail. BTUh Rating: There are circumstances in which a cellar design may require a larger unit due to some existing design restrictions. There are several factors such as glass, stone, concrete, etc. which will seem adequate but do not offer the insulation capacity required to maintain the optimum environment. We recommend purchasing a unit with a larger capacity to compensate for the design limitations. Under sized cooling units can lead to pre-mature failure and/or prevent the system from reaching the desired set temperature. As a result they are not covered under warranty. OPTIONS: Option Details The Exterior Grille protects the exhaust side of the system from the weather elements when installed through an exterior wall. The Exhaust Plenum allows the warm exhaust air to be ducted to another area. Ideal if the room adjacent to your cellar is not ideal for warm air to be exhausted into. This also allows you to duct the condenser supply air from an alternate location. * Ducting Upgrade: No Ducting Plenum Duct Plenum ( $149) * Grille Option: No Exterior Grille Exterior Grille ( $169) https://youtu.be/4ktsQqpT59A Extreme_ti-Product_Sheet Extreme_Owner_Manual Warranty Extreme Series$3,439.00
Reviews
There are no reviews yet.