CellarPro Mounting Clips 1800 2-Pk #1095-FI
$10.00
Product Description
CellarPro Mounting Clips 1800 2-Pk (SKU 1095-FI). Two mounting clips can attach anywhere along the front of CellarPro 1800 cooling units and offer pre-drilled slots for bolting to the ceiling of the wine cellar.
Framing is required in or above the ceiling.
Select this item when purchasing the mounting clips at the same time as the cooling unit. Select item #1092 when purchasing the mounting clips WITHOUT the cooling unit.
Description;
These mounting clips attach to the front of CellarPro 1800 Series cooling units and are designed to be bolted to the ceiling inside the wine cellar, as follows:
- Remove the front grill on the cooling unit by removing the 2 screws on each side of the cooling unit
- Slide the short side of each clip under the sheet metal at the front / top of the cooling unit
- Spread out the clips and/or space them to align with any pre-existing holes in your ceiling / framing
- Replace the front grill after the clips are in place
Cost: Price: $10.00 US
Options:
- Size:1 1/2w x 2d x 3/8h (in)
Only logged in customers who have purchased this product may leave a review.
Related Products
1800 Condensate Drain Line REAR + Heating Element #1709
Condensate Drain Line Heating Element 1800 (P/N 1709). When the wine cooling unit will be installed in a wine cellar with hot, humid conditions, our 100W heating element is designed to burn off excess moisture. In addition, the 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the rear of the cooling unit. Description; Strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed – it cannot be retrofitted in the field. 100W internal heating element Works in 110V environments 1/2-inch ID condensate fitting 8-foot drain line Cost: Price: $150.00 US Options: Please note: This item will work only in 110V environments. For 220V environments, choose our drain line heating element for 220V environments. Size:10 feet (drain line) Weight:.0001lb Warranty:1 Year$150.00
1800 Condensate Drain Line Bottom #7431
CellarPro Condensate Drain Line BOTTOM 1800 (P/N 7431). Recommended when the wine cooling unit will be installed in a wine cellar, 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the bottom of the cooling unit. DESCRIPTION: A condensate drain line is strongly recommended for wine cellar installations of 1800 Series wine cooling units. 1/2-inch ID condensate fitting 8-foot drain line Size:10 feet (drain line) Weight:.0001 lb Warranty:1 Year UPC:691054542433 COST: Price: $100.00 US OPTIONS: This option is designed to be factory-installed. If you already have purchased a CellarPro 1800 Series cooling unit, do not order this item; instead, you should order our Condensate Drain Line Retrofit Kit. Please note: The drain line is located 7-inches from the rear of the cooling unit. Therefore, the front 10 inches of the cooling unit MUST be located inside the wine cellar when used with this configuration.$100.00
1800 Condensate Drain Line REAR #1606
CellarPro Condensate Drain Line REAR 1800 (P/N 1606). Recommended when the wine cooling unit will be installed in a wine cellar, 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the rear of the cooling unit. This option is designed to be factory-installed. Description; A condensate drain line is strongly recommended for wine cellar installations of 1800 Series wine cooling units. 1/2-inch ID condensate fitting 8-foot drain line Cost: Price: $75.00 US Options: If you already have purchased a CellarPro 1800 Series cooling unit, do not order this item; instead, you should order our Condensate Drain Line Retrofit Kit.$75.00
Cold-Temperature Compressor Heater Factory Installed #1727
CellarPro Cold-Temperature Compressor Heater (P/N 32342 (1439)). Must be factory installed. When the cooling unit is exposed to cold temperatures, the refrigerant in the compressor can migrate into the crankcase oil when the compressor is not running. On startup, this can cause excessive motor wear and a loss of refrigeration efficiency. The compressor heater protects the compressor from damage in cold conditions below 40°F. Our self-regulating compressor heater attaches to the compressor and provides reliable peak heating during critical cold periods. Once the compressor starts up and/or temperatures start to rise, the compressor heater reduces its heating. Description; The compressor heater is required when the condenser (rear) side of CellarPro cooling units will be exposed to temperatures below 40°F. Enables cooling units to be exposed to temperatures below 40F Works effectively and reliably Promotes energy efficiency Extends compressor life Weight:.5 lb Power/Rating:120V / 60 Watts (at 0F) Warranty:1 Year SKU:32342 (1439)$135.00
CellarPro Mounting Clips 1800 2-Pk #1092-R
CellarPro Mounting Clips 1800 2-Pk (P/N 1092-R). Two mounting clips can attach anywhere along the front of CellarPro 1800 cooling units and offer predrilled slots for bolting to the ceiling of the wine cellar. Framing is required in or above the ceiling. Description; Mount to the front of CellarPro 1800 Series cooling units and are bolted to the ceiling inside the wine cellar. This is a retrofit item, and not for factory installation. Cost: Price: $10.00 US Options: Size:1.5w x 2d x 3/8h Weight:.1lb SKU:Clips (2)$10.00
CellarPro 1800 Duct Intake Hood (Cold Side) #1932
CellarPro 1800 Duct Intake Hood (Cold Side) (P/N 1932). This hood is designed to fit over the front of the cooling unit, and acts as a plenum to capture return air from the wine cellar. Two mounting brackets on either side keep the hood from moving around after installation. When using this hood, the cellar must be located directly below the wine cooling unit. Two openings must be created in the ceiling of the wine cellar, one (using this hood) for one for return air and one (below the exhaust fan) for supply air to drop down directly into the wine cellar. Other than as described above, the cold side of 1800 cooling units must never be ducted. PLEASE NOTE: The cooling unit MUST ALWAYS be installed in a conditioned environment when using this front intake hood. The risk is that the cold-side of the cooling unit, which is designed to be installed inside the cellar, will experience moisture condensation when the ambient environment is too warm and/or humid. Moisture condensation may damage the cooling unit’s electrical components. This damage is not covered by our manufacturer’s warranty. We do not recommend using the front intake hood with our 1800QTL cooling unit. Description: We created this hood to allow our CellarPro 1800QT, XT and XTS cooling units to be installed directly above (as opposed to inside) the wine cellar. Designed to fit over the intake coils at the front of all CellarPro 1800 wine cooling units Includes mounting clips to keep the cooling unit in place Allows the cooling unit to be installed above the wine cellar, rather than inside the cellar Cost: Price: $125.00 US Options: Weight:4.3 lb Warranty:1 Year SKU:193-0081 (1591) 1800-Front Intake Hood Cut Sheet, Ducting Best Practices, 1800-Rear Ducted Cut Sheet$125.00
CellarPro 1800XT Cooling Unit #1086 (for cellars up to 250cuft)
1456 BTUH @ 55°F. CellarPro 1800XT cooling units (1/5 Ton Nominal) are suitable for small wine cellars (up to 250 cubic feet), commercial applications and wine cabinets located in garages (in temperatures ranging from 50-95F). DESCRIPTION: Performance testing shows that this compact unit maintains optimal cellar temperature and humidity conditions more effectively than similar units from competing brands. 1800XT units also are significantly quieter than comparable units from other brands. Visit our Learning Center for data tables, performance charts and product comparisons among different brands. CellarPro 1800XT units are sized to replace Breezaire 2200 and Wine-Mate 2500 cooling units. Please confirm equivalent dimensions and airflow prior to purchase. CellarPro 1800XT Cooling Unit (P/N 1086). CellarPro engineered the 1800XT cooling unit for spaces that need extra BTUH and cooling capacity because of warm environments and/or the demands of a commercial establishment. 1800XT units are more powerful than CellarPro 1800QTL and 1800QT units, but also somewhat louder. Designed for indoor use only, 1800XT units can operate in environments ranging from 95°F to 40°F out of the box. To operate the unit in colder temperatures, please see modifications listed on the Options & Upgrades tab. This unit offers a choice of top or rear hot exhaust. If the unit’s location does not provide sufficient room for airflow, you may need to purchase a rear duct kit. Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar. Extra-large coils generate maximum cooling power. Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion. Intuitive LED display panel with digital programmable thermostat is simple and easy to use. Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs. Unit operates with minimal vibrations and less noise than comparable units from competitors. Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar. 10-foot power cord exits from the rear and plugs into standard 110V receptacles. Common dedicated 15-amp circuit is required to power the unit. 3-amp electric receptacle is provided to run a small lamp. Removable steel case provides access to the internal components for servicing and repair. CellarPro’s 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects. An optional Enhanced Warranty (#1835) is available for additional protection. ETL Tested and Certified to rigorous UL Standards for safety. CONFIGURATIONS: This unit offers a choice of top or rear hot exhaust. The 1800XT requires fresh air intake at the rear of the cooling unit. If sufficient space does not exist to provide sufficient airflow to the rear of the cooling unit, you may need a rear duct kit. 1800 Series cooling units can be installed completely inside the wine cellar when used with our rear duct kit, which allows you to duct the supply and return airflows from the rear of the cooling unit up to 100 equivalent feet (50 feet per duct). Please note:1800 Series cooling units cannot be ducted without auxiliary fan support, which is included with our our rear duct kit. You must located this unit within the cellar, with the following exception: these units can be installed directly above the wine cellar when used with our front intake hood. For installation in environments below 40°F, our compressor heater modification is required. For installation in environments below 20°F down to -20°F, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater. A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down. OPTIONS: Cold Temperature Compressor Heater #1727: protects the unit when installed in environments that drop down to 20°F. Fan Cycling Switch #6972: supports the unit in temperatures below 20°F and as low as -20°F when combined with our compressor heater. Duct Hoods Duct Intake Hood (Cold Side) #1932: permits the cooling unit to be placed directly above the cellar. Duct Hood (Hot Side) #7409: allows you to install the unit completely inside your cellar or in a small space with limited airflow. Includes an auxiliary fan, but no ducting. Duct Kit (Hot Side) #1439: same as the Duct Hood, this kit also includes 2 x 25-feet of 6-inch insulated (R-6) flex ducting. Remote Control & Probe Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring. Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar. Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths. Other Options & Upgrades Condensate Drain Line: strongly recommended for wine cellar installations (but not required for wine cabinets), a drain line allows excess moisture to drain from the bottom (#7431) or rear (#1606) of the cooling unit. Condensate Drain Line plus Heating Element: combined with a drain line, we add a 100W heating element to burn of excess moisture. Available with bottom (#7432) or rear (#1709) drain lines. Power Cord Modification #1098: normally the cord exits from the rear of the cooling unit, which generally is outside the cellar; this modification moves the cord to the front of the cooling unit, so that it can be plugged into an outlet inside the cellar. Mounting Clips #1095: attached to the front of CellarPro 1800 Series cooling units, these clips are designed to be bolted to the ceiling inside the wine cabinet / cellar. CellarPro 1800 Series Enhanced Warranty #1835 CellarPro Bottle Probe #1434 1800 CellarPro Power Cord Modification #1098 CellarPro Mounting Clips 1800 2-Pk #1092-R Compressor Crankcase Heater #1727 Fan Cycling Switch #6972: Remote Control and Display #1603: Condensate Drain Line: Condensate Drain Line plus Heating Element: Duct Intake Hood (Cold Side) #1932 Duct Hood (Hot Side) #7409 Duct Kit (Hot Side) #1439: 1800-Rear Ducted Cut Sheet, Owners Manual 1800, Configuration Oprions-1800, Limited Warranty Policy$1,325.00
CellarPro 1800 Duct KIT (Hot Side) with Inline Fan #1439
CellarPro 1800 Duct Kit (Rear) with Inline Fan (P/N 1439). This kit includes: 6-inch inline fan (120 CFM) 50 feet (2×25 feet) of 6-inch insulated ducting (R-6) Galvanized metal duct hood slides over the rear of the cooling unit and baffles the air intake and exhaust 8-foot power line provides switched power for the inline fan to match the on/off cycle of the wine cooling unit The duct hood is designed with an easy-access panel to replace the air filter (sold separately), and openings for the drain line and power cord. IF YOUR CELLARPRO 1800 COOLING UNIT ALREADY HAS SHIPPED WITHOUT WIRING FOR THE AUXILIARY FAN, DO NOT ORDER THIS ITEM. INSTEAD, ORDER OUR RETROFIT DUCT HOOD #7410 or KIT #1832. Allows CellarPro 1800 Series cooling units to be ducted up to 100 equivalent feet (50 feet per duct) using 6-inch ducting from start to finish (ducting must not be reduced). Inline fan (3000RPM, 120 CFM) has a permanently lubricated, impedance protected motor Heavy gauge plated steel brackets Switched power to match the cooling unit 50 feet of 6-inch insulated ducting (R-6) Designed to fit over the rear of all CellarPro 1800 wine cooling units Includes an easy-access panel to replace air filters (sold separately) Grommet openings for the drain line and power cord Size:18 1/8w x 6 3/4d x 10 1/8h (in) Weight:30 lb Power/Rating:115V, 60 Hz, 0.6 amps (Inline Fan) Warranty:1 Year UPC:691054542419 The depth of the hood includes 2 1/4 inches for the 6-inch dia. duct adapters. The hood is designed to slide over the rear of the cooling unit, and will overlap the cooling unit by approximately 1-2 inches. Cost $350 US 1800 Rear Duct Installation Instructions, Ducting Best Practices, 1800-Rear Ducted Cut Sheet, CellarPro-1800-rear-duct-hood$350.00
Reviews
There are no reviews yet.